Cobra CM-2206/17 Multirotor Motor, Kv=2400

Cobra CM-2206/17 Multirotor Motor, Kv=2400

Part Number:3358
On sale $17.99
In Stock

Description

Cobra Brushless Multirotor Motors offer performance and value for your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The Cobra CM-2206-17, 2400Kv motor is extremely versatile, and can be run on 3-cell, 4-cell, 5-cell or 6-cell Li-Po power. This motor was developed to meet the demands of the newest FPV Racing Quads, and produces huge amounts of power for contest winning performance. Be sure to check out the prop charts for a complete listing of all the test data.

The Cobra CM-2206 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2206 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CM-2206 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Included with every Cobra CM-2206 Series Motor is a complete accessory package which contains the following items:

Four M3x5mm Motor Mount Screws
Four M3 Flat Washers
Machined Aluminum Prop Washer
Locking Prop Nut with Nylon Insert

Click here for the Cobra CM-2206/17, 2400Kv Propeller Data Chart


Cobra CM-2206/30 Motor Specifications
 Stator Diameter 22.0 mm (0.866 in)
 Stator Thickness 6.0 mm (0.236 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 17 Turn Delta
 Motor Kv Value 2400 RPM per Volt
 No Load Current (Io) 1.158 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase 0.071 Ohms
 Motor Resistance (Rm) Phase to Phase 0.047 Ohms
 Maximum Continuous Current 25 Amps
 Max Continuous Power (3-cell Li-Po) 280 Watts
 Max Continuous Power (4-cell Li-Po) 370 Watts
 Max Continuous Power (5-cell Li-Po) 460 Watts
 Max Continuous Power (6-cell Li-Po) 550 Watts
 Motor Weight 36.5 grams (1.29 oz.)
 Outside Diameter 27.0 mm (1.063 in.)
 Motor Shaft Diameter 3.00 mm (0.118 in.)
 Prop Shaft Diameter 5.00 mm (0.197 in.)
 Motor Body Length 16.5 mm (0.650 in.)
 Overall Shaft Length 35.3 mm (1.390 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8-20 KHz



Motor Performance Graphs

The following downloadable PDF files show the performance data curves of the Cobra CM-2206/17, 2400Kv motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.

3-Cell Li-Po Power

Cobra CM-2206-2400 Performance Data with HQ 5x4.5 prop on 3S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x4.5-BN prop on 3S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x4 3-blade prop on 3S Li-Po


4-Cell Li-Po Power

Cobra CM-2206-2400 Performance Data with HQ 4x4 3-blade prop on 4S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 4x4.5-BN prop on 4S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x4 prop on 4S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x4.5 prop on 4S Li-Po


5-Cell Li-Po Power

Cobra CM-2206-2400 Performance Data with HQ 4x4 prop on 5S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 4x4 3-blade prop on 5S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x3 prop on 5S Li-Po


6-Cell Li-Po Power

Cobra CM-2206-2400 Performance Data with HQ 4x4 prop on 6S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 4x4.5 prop on 6S Li-Po

Cobra CM-2206-2400 Performance Data with HQ 5x3 prop on 6S Li-Po


Performance Graph Instructions

This downloadable PDF file shows the step by step process to use for interpreting the data shown in the Motor Performance Graphs. By following this procedure, you can determine how to select a proper motor for a Multirotor aircraft, as well as calculate required power levels, determine overall prop efficiency and calculate expected flight times based on the battery size that is used. This document can be printed out and saved as a valuable reference tool to keep in your workshop for future use as well.

Motor Performance Graph Instructions



*Please observe the motor specifications properly. This will determine the correct size ESC required for proper operation*

*Motors that have failed\burned running on an incorrect ESC size will void warranty*



For more information about this product and the rest of the Cobra Motors product line, please check out the Cobra Brushless Motors web site.

Related Items

Recently Viewed Items

Information
Browse By Category