This HYPERLOW is a new breed of top mounted 5" freestyle frame.
With a fully enclosed and recessed camera, traditional 35mm standoffs are a thing of the past. The HYPERLOW allows for a *10mm* AIO build.
Lower standoffs equals lower center of gravity, meaning tighter handling and increased performance when coupled with an optimized motor layout.
Key to the modular build is a quick change arm system. With only two bolts to remove, and a single motor to unscrew, an arm can be replaced in just a couple of minutes without disturbing the FC stack.
Check our recommended parts tab to optimize your build.
Official Hyperlow Session Mount available from Brain3D HERE
*Hyperlow frames are designed around an HS1177 style camera body (26mm x 26mm, center mount hole). Similar form factors can be housed, however perfect compatibility with a 10mm build and included camera mounts is not guaranteed.
Kit parts list:
- 1 x 2mm top plate
- 1 x 3mm bottom plate
- 1 x 2mm brace
- 4 x 3mm arms
- 1 x 3mm camera bumper
- 4 x 1mm nylon washers
- 4 x 5mm nylon standoffs
- 4 x nylon nuts
- 6 x 8mm button heads
- 8 x 6mm button heads
- 6 x standoffs
- 8 x 3mm locknuts
- 10 x 12mm button heads
*battery strap not included at this time
Carbon weight: 99grams
Dimensions: 162mm x 166mm (230mm)