Home > FPV Systems & Cameras > Video TX and RX

Pyro-Drone Race VTX 600mw 40 Channel W/Pigtail

Part Number 3346
Pyro-Drone Race VTX 600mw 40 Channel W/Pigtail
Price
Your Price:  
$49.99
Availability:
In Stock
Quantity
Add to Gift Registry
Description

Pyro Drone VTX and any other brand VTX needs to be powered from a regulated source like a 12V pololu or if using a PDB with regulators (like Matek) 12V needs to be used to power the VTX!
VTX that is powered from a direct power source (3s or 4s battery) will eventually burn and will not be covered under warranty!



The Pyro-Drone PD586R and PD586p Mini 600mW 5.8GHz 40CH FPV video transmitter are the perfect VTX for FPV racing! 
 The PD586 has 40 channels including the new Raceband frequencies. Our friends from ImmersionRC first divided the 5.8 band into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an on-board microphone to transmit audio to your receiver.

The PD586 features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 7.5g! It stays cool to the touch during operation, so you don't have to worry about it overheating in a crash.

Features

  • 40 channels: Covers 5 Bands
  • Intuitive and easy to use button and LEDs for frequency selection
  • Provides 5v power output for FPV cameras
  • Small sized and light weight
  • Transmitter frequency: 5658-5925MHz with 200mW power output
  • Transmitting distance >  1000m (open area)
  • SMA Antenna connector
  • Dimensions: 32*22*9mm (not including SMA adapter)
  • Audio: Includes on board microphone

Specifications:

  • Operating Voltage: 7 - 20V
  • Supply current: 50 mA
  • Operating Temperature: -10 +85 C
  • Video Band Width: 5-6 MHz
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Level: 0.8,1.0,1.2 Vp-p
  • Video Input Impedance: 75 Ohm
  • Audio Input Level: 0.8 ,2.0 Vp-p
  • Audio Input Impedance: 10K Ohm
  • Weight: 7.5g (without antenna)
  • Antenna Connector: SMA Female Connector
  • Video Format: NTSC/PAL
  • Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR
Related Items
Foxeer TM200 FPV Mini 5.8G 40CH 200mW VTx Race Band ***SMA***
Foxeer TM200 FPV Mini 5.8G 40CH 200mW VTx Race Band ***SMA***
Your Price: $29.99
DUO5800 v4.1 5.8GHz A/V Receiver Race Edition
DUO5800 v4.1 5.8GHz A/V Receiver Race Edition
Your Price: $149.00
Lumenier TX5GPro Mini 200mW 5.8GHz FPV Transmitter with Power Switch
Lumenier TX5GPro Mini 200mW 5.8GHz FPV Transmitter with Power Switch
Your Price: $38.99
Pyro-Drone Race VTX 200mw 40 Channel
Pyro-Drone Race VTX 200mw 40 Channel
Your Price: $38.99
Foxeer TM600 600mW 5.8G 40CH VTX Race Band Pigtail
Foxeer TM600 600mW 5.8G 40CH VTX Race Band Pigtail
Your Price: $29.99
10cm SMA Pigtail
10cm SMA Pigtail
Your Price: $3.29
Recently Viewed Items