PyroDrone F4 OSD

PyroDrone F4 OSD

Part Number:4547
Your Price: $32.99
In Stock
Free Shipping



The new batch of Pyrodrone F4 OSD includes the Hobbywing G2 harness instead of the original HW.

However we just found out that this can cause the FC burn if plugged in the Aikon or vice versa.
PLEASE Pay extra attention to the wire color.
Both Hobbywing and Aikon use 10 pin connector!
Aikon comes with a PINK wire and HW DOES NOT, this is the easiest way to differentiate the differences for now.
Future batch will have wires labeled, also the current batch we will be adding Warning labels on the bags.

Check the below Race footage from MewoFPV Cory Ibanez 1st place winner at the Nytfury VS Dolma Callout Race using the PyroDrone F4 OSD Flight Controller.

Straight gold. The US currency should be backed by this FC! (Cory Ibanez)

HyperLite F4 OSD

One of the most popular FC’s is back and better than ever, combining an industry favorite layout with new feature sets for freestyle, long range, and racers. Finally, a board for every pilot!  

The new Hyperlite F4 OSD takes the same celebrated ‘flat-bottomed’ layout (crucial for clean and tight builds) and adds a much appreciated OSD and SIX UART ports (more than any other board on the market!) for GPS, RX, SmartAudio, and even Camera Control.  

And with more features, comes improved ease of use with a built in 4-in-1 ESC socket and included harnesses for HobbyWing 45Amp G2 ,AiKON AK32, and Spedix GS35 4in1 ESCs. The built in solder pads mirror the 4in1 pad layout, so you can easily connect ANY ESC to this board to get features like current sensing and ESC telemetry (for the BL32 guys). 

PLEASE NOTE: The Hyperlite F4 OSD uses it’s own BF target .bin, “PYRODRONEF4”. 

Tech Specifications:

MPU6000 Gyro
STM32F405 CPUE @ 168mhz, can be overclocked
2-6S direct battery input 
3.3V 100ma, 5V 1.2A BEC
5V Camera Power
Built in configurable Betaflight OSD
Flat bottom PCB for SUPER CLEAN builds
36x36 PCB with 30.5x30.5 mounting holes
          UART2 (FREE),
                  UART3 (INVERTED TELEMETRY), use CLI command : Set tlm_halfduplex=off 
                  UART4 (Free),
                  UART5 (Smart Audio)
                  UART6 (Free)

Built in 4 IN 1 ESC socket(including ESC telemetry, External current sensor)
Plug and plug with the most popular 4-in-1 ESCs (HobbyWing, Airbot, Spedix, Aikon),with supplied cables
Built in solder pads mirror of the 4-in-1 ESC socket
Printed layout instructions ON the board - no need for instructions!

Related Items

Customer Reviews

5 Stars
Happy Customer
I've received my new hyperlight F4 osd and was real impressed with how fast I received it. I'm loving the layout of this flight controller, and can't wait to put it on my new build. I'm just waiting on a little extra money to come in before I can get the rest of what I need for this build. This thing looks solid and has everything I'm looking for in a flight controller for racing. This one is gonna be my first YouTube build tutorial. So when it's all said and done I'll post a link. I'll be definitely doing more business with Pyrodrone in the future. Looks like some really great products.
Did you find this helpful?  14 of 15 Found Helpful
Reviewed by: (Verified Buyer)  from Kannapolis, NC. on 2/19/2018
5 Stars
hyperlite f4 osd
i own 3 hyperlite f4 osd boards the pad layout is great. easy to solder to and has everything that you need and want to give you the best stress free flight experience. the flat back helps out with tight builds and it just works.
Did you find this helpful?  6 of 6 Found Helpful
Reviewed by: (Verified Buyer)  from jacksonville. on 4/1/2018
5 Stars
One of the best FC!
Very well designed, so good to install a well thinked FC like this one !
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from France. on 9/13/2018
5 Stars
Best FC
Easy to use, clean build FC and it works great.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Guam USA. on 9/13/2018
5 Stars
Best flight controller
If you are using a 4in1 this is the best fc on the market. If you are not... not for you.
Did you find this helpful?  0 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Bonita springs. on 9/10/2018
5 Stars
Only been flying with it for a couple of weeks, but so far so good. Works great for me on stock PIDs and rates!
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from New London. on 9/8/2018
5 Stars
Hyperlite F4 FC
Amazing FC at a pricepoint that fits most budgets. This FC performs like a champ. OSD and the layout of the hole through pads make it easy to set up and easy to view all pertinent flight data. Do yourself a favor and get this now before thet sell out.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Sanford FL. on 6/4/2018
5 Stars
Best I’ve tried so far.
I’ve put these on probably about 10 builds and have been very happy with them. The layout is stellar makes it really easy to build. Highly recommended.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Granada Hills. on 6/3/2018
5 Stars
Sergio flavored F4 osd
I have all of these FC's since inception.. They are bulletproof almost!!! I love the ease of these boards. Thanks serge, you quad guru you!!!
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Spokane WA . on 5/9/2018
4 Stars
Perfect for 4in1 builds
I have purchased three of these boards two of them work fantastic the other board doesn’t output signal to two motors . I messaged pyrodrone about a potential soldier bridge on the f4 chip from the factory. Also sent pictures. It’s been a week and they won’t reply. Otherwise this would be 100% positive
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Florida . on 4/22/2018
5 Stars
This F4 worked perfect when combined with Aikon 6S Aio Esc. They even include a Uart map on the bottom of the board.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Rochester. on 4/21/2018
5 Stars
From one Hyperlite to the next
I used to rock the original Hyperlite FC which was solid and an amazing value. Broke the gyro on it and decided to see what the Hype was about. Soft mounted right from the get-go makes a huge difference. The FC comes with 6 little rubbers that dampen vibrations going to the brain. It has more UARTS than what I know what to do with. All the pads are easy to solder to except the motor pads because they're a little smaller than the rest but that's no big deal. Ran 10 packs before this review, and it flies amazing.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from SoCal. on 4/17/2018
5 Stars
This fc is now my go-to flight controller for EVERYTHING. So many uarts, such a great layout, and that flat form factor. And the fact that it pairs perfectly with the reliable aikon32 4in1 is a bonus...a really really big bonus. Perfection.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Baton Rouge, LA. on 4/11/2018

Recently Viewed Items

Browse By Category