F4 OSD Specs:
HyperLite F4 OSD
One of the most popular FC’s is back and better than ever, combining an industry favorite layout with new feature sets for freestyle, long range, and racers. Finally, a board for every pilot!
The new Hyperlite F4 OSD takes the same celebrated ‘flat-bottomed’ layout (crucial for clean and tight builds) and adds a much appreciated OSD and SIX UART ports (more than any other board on the market!) for GPS, RX, SmartAudio, and even Camera Control.
And with more features, comes improved ease of use with a built in 4-in-1 ESC socket and included harnesses for HobbyWing, Airbot, and Spedix 4in1 ESCs. The built in solder pads mirror the 4in1 pad layout, so you can easily connect ANY ESC to this board to get features like current sensing and ESC telemetry (for the BL32 guys).
PLEASE NOTE: The Hyperlite F4 OSD uses it’s own BF target .bin, “PYRODRONEF4”.
STM32F405 CPUE @ 168mhz, can be overclocked
2-6S direct battery input
3.3V 100ma, 5V 1.2A BEC
5V Camera Power
Built in configurable Betaflight OSD
Flat bottom PCB for SUPER CLEAN builds
36x36 PCB with 30.5x30.5 mounting holes
6 UARTS. UART1 (INVERTER FOR SBUS),
UART3 (INVERTED TELEMETRY),
UART5 (Smart Audio)
Built in 4 IN 1 ESC socket(including ESC telemetry, External current sensor)
Plug and plug with the most popular 4-in-1 ESCs (HobbyWing, Airbot, Spedix, Aikon),with supplied cables
Built in solder pads mirror of the 4-in-1 ESC socket
Printed layout instructions ON the board - no need for instructions!
HobbyWing 45Amp G2 Specs:
XRotor ESC - 4in1 series
|45A BLheli32 Dshot1200||40A BLHeliS DShot600||12A FPV|
|BLHeli32 DShot1200||BLHeli-S DShot600||HW Special Program for FPVs|
|Application||FPVs with 130-200mm|
|FPVs with 130-280mm|
|FPVs with 150=mm|
|LiPo Power input||3-6S Lipo||2-5S Lipo||1-4S LiPo|
|BEC Output||5V@1.5A / 10V@1.5A||5V & 1.5A||5V,1A|
|Input wires||12AWG-130mm||14AWG-130mm||18AWG-100mm (Red/Black)|
|Output Wire||No wires but solder tabs||No wires but solder tabs|
No wires but solder tabs
|XT60 (w/ Wires Soldered on) /no||XT60 (w/ Wires Soldered on)||no |
|Weight / Size||11.5g / 32.7x18.4x6.2mm||10g / 42.6x36x4mm||8g / 38.1x37.9x5.3mm|
* Note: All the wire length above is the original length, not the length you see from the outside.